← 공개 라이브러리

Monitor Brightness and Contrast Calibration

by MASTER

Quick manual calibration to set brightness and contrast for accurate shadow and highlight detail; run when room lighting changes or after moving the monitor.

Fecit 앱에 저장하기
이 루틴을 Fecit 앱에서 열어 내 라이브러리에 추가하세요.
앱에서 열기 App Store Play Store

내용 미리보기

Monitor Brightness and Contrast Calibration

Quick manual calibration to set brightness and contrast for accurate shadow and highlight detail; run when room lighting changes or after moving the monitor.

⏱ 27분 ★ 보통
현재

Monitor brightness and contrast are at unknown or default settings and shadows or highlights appear clipped or washed out when viewing reference images.

기대

Shadows show visible detail without crushing, highlights retain texture without clipping, and images look balanced at your typical viewing distance.

도구
  • • Calibration test images (web) — 1
  • • Colorimeter (optional) — 1 (optional)
단계
  1. 01
    Warm up monitor and control ambient light
    Turn the monitor on for 10 minutes and set room lighting to the level you normally work in; close blinds or change lamps until ambient light is stable.
    ⏱ 10분
  2. 02
    Reset display settings and open test patterns
    Restore monitor to a standard preset, set the OS color profile to default, and open the calibration test images in full-screen on the primary display.
    ⏱ 2분
  3. 03
    Adjust brightness for black level
    Using the black-level pattern, lower or raise monitor brightness until the darkest bars match the near-black reference and the first few shadow steps remain distinguishable at your viewing distance.
    ⏱ 5분
  4. 04
    Adjust contrast for white clipping
    Using the white-level pattern, increase contrast until the brightest steps separate without losing highlight texture; stop when the topmost step is just distinguishable from pure white.
    ⏱ 5분
  5. 05
    Verify grayscale and save settings
    Scan grayscale and color patches for smooth steps and neutral midtones, make minor tweaks if needed, then save the monitor preset or record the settings; if using a colorimeter, run the profiling step now.
    ⏱ 5분