Reinforce and label children's board books

by MASTER

Apply clear reinforcement tape to worn edges and attach a printed barcode label so books are protected and inventory-ready; use this when preparing batches for circulation or sale.

Fecit 앱에 저장하기

이 루틴을 Fecit 앱에서 열어 내 라이브러리에 추가하세요.

앱에서 열기 App Store Play Store

내용 미리보기

Reinforce and label children's board books

Apply clear reinforcement tape to worn edges and attach a printed barcode label so books are protected and inventory-ready; use this when preparing batches for circulation or sale.

⏱ 30분 ★ 보통

현재

A stack of children's board books with frayed corners and no barcode labels sitting on a work surface.

난관

Thick board pages and rounded corners make aligning tape without wrinkles difficult, and labels must be positioned and cut so the barcode remains fully visible and scannable.

기대

Each book has neat, flush tape reinforcement on exposed edges and a scannable barcode label placed without covering artwork.

재료

• clear archival book tape — 1 roll
• adhesive barcode labels — 1 sheet

도구

• precision scissors — 1
• label printer — 1
• smartphone with barcode scanner — 1

단계

01

Set up workspace and tools

Clear a 2-foot square work area, lay a clean cloth, plug in the label printer, place tape, label sheet, scissors, ruler, and phone within reach, and open the barcode label file on the computer or printer.

⏱ 5분
02

Inspect and mark each book

For each book inspect corners and edges, wipe dust with a dry cloth, remove loose fibers with your thumb, and mark label placement with a small pencil dot 10 mm from the bottom edge and 15 mm from the side.

⏱ 8분
03

Apply reinforcement tape to edges and corners

For each book cut a tape length 1–1.5 times the edge length, align the tape flush with the outer edge, smooth from center outward with fingers or a bone folder to remove bubbles, and wrap corners with a 45-degree fold trimmed flush to the board.

⏱ 10분
04

Print, trim, apply barcode labels and scan

Print barcodes on the label sheet, cut to size if needed, align each label on the marked spot, press from center outward to adhere, then scan each barcode with the smartphone app to confirm it reads.

⏱ 5분
05

Final quality check and stack

Visually inspect each book for tape alignment and label placement, rework any with wrinkles or unreadable barcodes, then stack books with spines aligned for storage.

⏱ 3분