Mobile Wi-Fi Hotspot Checkout Test
Validate that a mobile device can be checked out as a Wi-Fi hotspot and that the checkout log is updated; run this when assigning a hotspot to a user or after device/firmware changes.
내용 미리보기
Validate that a mobile device can be checked out as a Wi-Fi hotspot and that the checkout log is updated; run this when assigning a hotspot to a user or after device/firmware changes.
The target device has not been checked out yet and there is no checkout entry for it in today's log.
The admin portal shows internal device IDs that differ from the smartphone's IMEI/MAC, making it hard to match the physical device to the log entry; intermittent mobile data dropouts may also cause false negatives during the functional test.
The device is checked out, the hotspot provides internet to a client device, and the checkout log contains a timestamped entry with device identifiers and attached evidence.
- • Test smartphone — 1
- • Client laptop — 1
- • Workstation with admin access — 1
- 01 Prepare test devices and record identifiersCharge the smartphone to at least 50%, insert the test SIM if needed, power on the client laptop, and record the smartphone IMEI and Wi-Fi MAC in a note.⏱ 5분
- 02 Create checkout in admin portalLog into the admin portal, locate the device using available identifiers, assign it to the test user or account, set checkout start time, and capture a confirmation screenshot.⏱ 5분
- 03 Enable hotspot and run connectivity testsOn the smartphone enable the Wi-Fi hotspot with the configured SSID/password, connect the client laptop, load three distinct web pages and transfer a 5 MB file to confirm data transfer and note signal and any failures.⏱ 8분
- 04 Update checkout log and ticketOpen the official checkout log or database, add an entry with device IMEI/MAC, user, start time, expected return, attach screenshots and test notes, and set ticket status to 'checked out'.⏱ 5분
- 05 Post-test cleanup and audit confirmationTurn off the hotspot, disconnect the client, return the device to storage state, verify the new log entry appears in the audit view, and close the test notes.⏱ 8분