← 공개 라이브러리

Meeting Room Thermostat Verification and Schedule Sync

by MASTER

Verify the meeting room thermostat settings and align the HVAC schedule when occupants report comfort issues or after schedule changes. Use this routine to confirm the physical thermostat and the building management system are synchronized.

Fecit 앱에 저장하기
이 루틴을 Fecit 앱에서 열어 내 라이브러리에 추가하세요.
앱에서 열기 App Store Play Store

내용 미리보기

Meeting Room Thermostat Verification and Schedule Sync

Verify the meeting room thermostat settings and align the HVAC schedule when occupants report comfort issues or after schedule changes. Use this routine to confirm the physical thermostat and the building management system are synchronized.

⏱ 30분 ★ 보통
현재

Thermostat shows an unexpected mode or temperature and the BMS schedule does not match the room's published booking hours.

난관

Local temporary holds or manual overrides on the thermostat prevent schedule updates, and the BMS schedule may be out of sync or require admin credentials to edit.

기대

Thermostat mode, temperature setpoints, and the BMS schedule match the room's booking hours and the thermostat responds to overrides within five minutes.

도구
  • • Laptop or tablet — 1
  • • Room access badge/keys — 1
  • • Admin credentials — 1
단계
  1. 01
    Inspect the physical thermostat
    Enter the room, note the displayed temperature, operating mode (heat/cool/auto/off), and any active temporary overrides; take a photo of the screen for records.
    ⏱ 5분
  2. 02
    Compare BMS schedule to booking calendar
    Log into the building management system, open the meeting room's schedule, and compare setpoints and occupied periods against the published booking calendar for today and the next week.
    ⏱ 10분
  3. 03
    Update or sync the schedule
    Edit the BMS schedule to match the room's regular booking hours and setpoints, save changes, and trigger a schedule sync to the thermostat; record the timestamp of the update.
    ⏱ 8분
  4. 04
    Apply override and observe response
    Apply a temporary override or run a single-cycle HVAC call from the BMS, observe the thermostat and room temperature indicator for up to five minutes, and note any failure to follow the new schedule.
    ⏱ 5분
  5. 05
    Document changes and notify stakeholders
    Log pre/post readings, changes made, timestamps, and any follow-up actions in the maintenance ticketing system, then notify the room owner and facilities manager with the outcome.
    ⏱ 3분