Setting Up a New Smartwatch or Fitness Tracker
内容のプレビュー
Before you pair: the right app and some charge
Every brand pairs through its own companion app, not your phone's Bluetooth menu.
- Apple Watch uses the Watch app and needs an iPhone.
- Samsung Galaxy Watch (Watch4 and newer) uses Galaxy Wearable and needs Android.
- Pixel Watch uses the Google Pixel Watch app and needs Android.
- Garmin uses Garmin Connect and works with either phone.
- Fitbit uses the Fitbit app with a Google account and works with either phone.
Install the app and update your phone's OS first. A watch that needs a newer phone OS will stall halfway through pairing.
While you do that, put the watch on its charger for 20-30 minutes. Many watches ship with only a cable. Any 5W or stronger USB plug that matches the cable's end (USB-C or USB-A) will charge it. Apple's fast charging needs an 18-20W USB-C adapter.
Wrapping it as a gift? Don't pair it yourself, because it will tie to your account. For a kid without their own iPhone, use Apple's Family Setup (cellular models only) or a Fitbit or Garmin kids' profile instead.
Let the update run while you set things up
Most watches download a firmware update right after pairing, which can take 20-60 minutes. Keep the watch on the charger, with the phone on Wi-Fi and within a few feet. Don't restart either device mid-update.
If the phone app lets you, fill in the health profile and notification settings during the wait; this is where experienced owners save time. Some watches hold setup until the update finishes. In that case, use the wait to pick bands or browse watch faces.
Bought a cellular model? The setup flow may offer a carrier plan, usually about $10 a month in the US. Skip it if you're unsure, because you can add it later from the app.
Spend your time on notifications and the health profile
- Start notifications from off. Turn off mirroring for all apps, then switch on 3-5 you'd actually look at your wrist for, such as calls, texts, calendar, and a delivery or ride app. Adding one later is easier than muting 40.
- Enter your real height, weight (lb or kg), birth date and sex. Calories, stride length and fitness estimates are calculated from these.
- Set which wrist you wear it on. The non-dominant wrist logs fewer false steps from gestures.
- Add an emergency contact or Medical ID, and turn on fall detection if your watch offers it. Apple only enables it by default for users 55 and older.
- Want tap-to-pay (Apple Pay, Google Wallet, Samsung Wallet, Garmin Pay)? Set a watch passcode and add a card now. If you'll never pay with it, skip both.
- Decide now whether you'll wear it to sleep. If you will, pick a daily charging slot, like during your shower or morning coffee.
How to tell it worked
Wear the watch one finger width above your wrist bone. It should be snug enough not to slide but loose enough to leave no deep marks.
Then take a test walk of about 10 minutes, roughly half a mile (0.8 km) or two laps of a 1/4-mile (400 m) track. Keep your phone in a pocket. Afterward, check these:
- The watch's step count lands within roughly 10% of the phone's count for the same walk.
- A heart rate reading appears.
- The walk shows up in the phone app within a few minutes of syncing.
- A text you send yourself makes the watch buzz.
Keep the box and receipt until you've worn it for a few days. Check your retailer's return date: holiday purchases in the US often have to go back by mid-to-late January.
- When the companion app can't find the watch after two tries→Restart both devices, keep Bluetooth on, hold the watch within a foot of the phone, and start again from the companion app rather than the phone's Bluetooth settings.
- When an open-box or hand-me-down watch shows Activation Lock or a previous owner's account→Stop and ask the previous owner or seller to remove it from their account; if they can't, return it, because it cannot be bypassed.
- When the firmware update sits at the same percentage for more than 30 minutes→Leave the watch on the charger with the phone nearby on Wi-Fi and wait up to another 30 minutes before restarting the watch.
- • Smartwatch or fitness tracker with its charger — 1 set
- • Smartphone — 1 pcs
- • USB wall adapter — 1 pcs
- 01Charge the watch and prepare the phonePut the watch on its charger while you update the phone's OS and install and sign in to the brand's companion app.⏱ 10分
- 02Pair the watch through the companion appFollow the in-app prompts with Bluetooth and Wi-Fi on, skip any cellular plan offer you're unsure about, then leave the watch on the charger while any firmware update runs.⏱ 15分
- 03Fill in the health profile and safety settingsEnter real height, weight, birth date and wrist choice, add an emergency contact, turn on fall detection if it's offered, and set a passcode and wallet card only if you'll pay with the watch.⏱ 10分
- 04Trim notifications and pick a watch faceTurn off mirroring for all apps, then allow only 3-5 you need on your wrist, and choose a face showing the time plus one or two stats you'll check.⏱ 15分
- 05Take a test walk and check the syncWith your phone in a pocket, walk about 10 minutes (about half a mile, 0.8 km), check the watch is within about 10% of the phone's steps, confirm a heart rate reading, and text yourself to test the buzz.⏱ 15分