← 공개 라이브러리

Accessibility equipment check and signage update

by MASTER

Verify that accessibility equipment functions and signage is clear and compliant; run this when onboarding a new facility, after reports of issues, or on a monthly check. The goal is to catch functional faults and fix or schedule replacements for unclear signage.

Fecit 앱에 저장하기
이 루틴을 Fecit 앱에서 열어 내 라이브러리에 추가하세요.
앱에서 열기 App Store Play Store

내용 미리보기

Accessibility equipment check and signage update

Verify that accessibility equipment functions and signage is clear and compliant; run this when onboarding a new facility, after reports of issues, or on a monthly check. The goal is to catch functional faults and fix or schedule replacements for unclear signage.

⏱ 30분 ★ 보통
현재

Some external and internal accessibility signs are faded, missing, or mounted at incorrect heights and at least one automatic door or lift has not been tested recently.

난관

Replacement tactile or high-contrast signs are not stored on site and some devices are behind locked panels or require technician intervention to access diagnostic ports.

기대

All tested accessibility devices respond within expected parameters and any missing or unreadable signs are replaced or logged for maintenance with clear instructions.

재료
  • • Replacement adhesive signs — 3 each
도구
  • • Flashlight — 1
  • • Smartphone — 1
  • • Screwdriver set — 1 set
  • • Measuring tape — 1
단계
  1. 01
    Survey approach routes and exterior signage
    Walk main entrances and pedestrian routes, record each missing, faded, obstructed, or incorrectly mounted sign, take a photo, and mark the exact location on a floor plan or map.
    ⏱ 5분
  2. 02
    Test automatic doors and ramps
    Activate each automatic door and observe sensor response, opening/closing speed, and hold-open time; operate platform lifts or portable ramps through a full cycle and note any error codes or delays with photos.
    ⏱ 12분
  3. 03
    Replace tactile/Braille and high-contrast signs
    Remove damaged signs and install replacement adhesive tactile/Braille or high-contrast signs at the specified mounting heights, then verify legibility and measure mounting height to confirm compliance.
    ⏱ 7분
  4. 04
    Document issues and assign repairs
    Log each failed item with photos, exact location, and recommended action, tag items needing a technician, and send a prioritized report to facilities and the accessibility coordinator with deadlines.
    ⏱ 6분