Skip to main content
← 공개 라이브러리

Taking Down and Storing Christmas Decorations

by MASTER
Packing away lights, ornaments and the tree in early January is your one chance to make next year's setup a quick, box-by-box job instead of an afternoon of untangling and hunting for hooks. Most people do it the first weekend after New Year's, or by Twelfth Night (January 5–6) if you follow the UK tradition.
페칫 앱에 저장하기
이 루틴을 페칫 앱에서 열어 내 라이브러리에 추가하세요.

내용 미리보기

Taking Down and Storing Christmas Decorations

Pack by where things go, not by what they are

Group decorations by zone (tree, mantel, front porch, kitchen). Don't put all the lights in one bin and all the figurines in another. Next December you open one box and decorate one spot start to finish.

Label each bin on two sides and the lid with the zone and a short contents list. Write OPEN FIRST on the box that holds the tree lights, tree skirt and topper, since those go on before anything else. Pack that box last so it sits at the front of the stack.

Take things down in this order:

  • topper and ornaments first,
  • then the tree lights,
  • then the tree,
  • then the skirt.

Pulling lights off a tree that still has ornaments on it is how glass gets knocked to the floor. Take batteries out of light-up village pieces, candles and battery string lights before packing. Batteries left in for 11 months can leak and corrode the contacts.

The step times assume one tree, 2–3 other zones and 10–15 light strands. Add about 3 minutes per extra strand and 15–20 minutes per extra zone.

Lights deserve the most time

Lights are where next year's headaches come from, so slow down here and speed up everywhere else.

Test every strand while it's still plugged in, before winding it. A dead strand found now gets tossed or fixed; one found in December means a store run mid-decorating. Give a dark strand about 5 minutes: check the small fuses in the plug and try a bulb tester. If it still won't light, set it aside for recycling (many hardware stores collect old lights in January).

Unwind strands by walking them off the branches or railing rather than pulling. Then wind each one around a stiff cardboard rectangle about 6 x 12 inches (15 x 30 cm) with a slit at each end to hold the plug. Cord reels also work if you have many outdoor runs. Tape a tag to the plug saying where it went and how many strands that spot takes, e.g. "porch railing – 3 strands, plug left."

Pre-lit artificial trees: plug in each section and note any dark zones on the bag label.

  • Small budget: cereal-box cardboard and freezer bags do the job.
  • Large collection: a divided ornament box (12–64 slots) saves the most wrapping time and is worth buying once.
  • Roofline or gutter lights: use an extension ladder with someone footing it, never a step stool. Do them on a dry, calm day. Unplugged lights can wait outside a few more days.

Where the bins spend 11 months

Pick a spot that stays dry and below about 85°F (29°C). Attics and garages in the US South and in an Australian summer get hot enough to melt candles, soften the glue on ornaments and crack old plastic. Damp basements cause musty tissue paper and rusted hooks.

A closet, under-bed space or interior shelf is safest for glass and anything sentimental. Use lidded plastic bins rather than cardboard wherever pests or moisture are possible. Keep each bin under about 40 lb (18 kg) so it's safe to lift down from a shelf.

How to tell it went right

You're done when all of this is true:

  • Every bin is labeled on two sides.
  • No loose hooks are rolling in the bottom of a box.
  • Each light strand has a location tag.
  • You have a one-page list, or a phone photo of each open bin, showing what's where and what to replace.

If you can name which box holds the tree topper without opening anything, it worked.

⏱ 2시간 30분★ 쉬움
현재
Ornaments are still on the tree, light strands are clipped to railings and wrapped around branches, and empty boxes from last year are stacked in no particular order in the garage or closet.
난관
Light strands get yanked off branches and balled up, so they knot and the dead ones go unnoticed until next year. Ornament hooks and small pieces fall loose into boxes, scratching glass and going missing. Bins get filled with whatever is nearest and end up too heavy, or impossible to identify without opening them.
기대
Labeled, lidded bins sit stacked in one storage spot with the OPEN FIRST box in front. Each bin holds one zone's decorations, with ornaments wrapped, hooks bagged and every light strand wound on a card with a location tag, plus a short list of what needs replacing.
대응 지침
  • When outdoor lights are on the roofline or gutters and it's icy, wet or windy on takedown day
    →
    Unplug them at the outlet and leave them up until a dry, calm day, then take them down with an extension ladder and a helper footing it.
  • When you realize you have far more decorations than bins
    →
    Fill bins with fragile and sentimental items first, then put sturdy things like plush, garland and the tree skirt in heavy-duty trash bags or vacuum bags labeled by zone.
  • When an ornament breaks or a decoration is clearly worn out
    →
    Decide on the spot: discard it, fix it now, or put it in one labeled REPAIR bag inside the OPEN FIRST box so you deal with it before decorating.
준비물
재료
  • • Tissue paper — 50 sheets
  • • Zip-top bags — 10 pcs
  • • Stiff cardboard — 1 card per strand
  • • Labels or masking tape — 1 roll
  • • Packing tape — 1 roll
도구
  • • Lidded plastic storage bins — 4 pcs
  • • Divided ornament storage box — 1 pcs
  • • Tree storage bag — 1 pcs
  • • Step stool — 1 pcs
  • • Extension ladder — 1 pcs
  • • Permanent marker — 1 pcs
  • • Bulb tester — 1 pcs
인력
  • • Helper
단계
  1. 01
    Set up a packing station and label bins by zone
    Clear a table or floor area, set out one open bin per zone (tree, mantel, porch, etc.) and label each on two sides before anything goes in, so items land in the right place as they come down.
    ⏱ 15분
  2. 02
    Wrap and pack ornaments
    Take off the topper and every ornament before touching the lights. Pull all hooks into one zip bag and remove batteries from light-up pieces. Wrap each glass or fragile piece in its own tissue sheet, layering heavy items on the bottom and the lightest glass on top, and stop when the bin reaches about 40 lb (18 kg).
    ⏱ 45분
  3. 03
    Test, unhook and wind the lights
    With each strand still plugged in, note dark sections, then unplug it and walk it off the branches or railing. Wind it onto a cardboard card with the plug tucked in a slit and tape on a tag with its location and strand count.
    ⏱ 40분
  4. 04
    Take down the tree
    For an artificial tree, remove sections from the top down, fold the branches up toward the pole and zip them into the bag. For a real tree, drain the stand with a turkey baster and pull a tree removal bag down over the top (or up from under the stand if you laid it there at setup). Carry it out trunk first and check your local curbside pickup or drop-off dates.
    ⏱ 30분
  5. 05
    Record contents and stack bins in storage
    Photograph each open bin or jot a one-line list, and write a replace list (dead strands, broken hooks, low tissue). Then add the tree skirt to the OPEN FIRST bin, close the lids and stack that bin last so it sits in front.
    ⏱ 20분